Wireless 5″ Monitor Car Rear View System Backup Reverse Camera Night Vision Kit

Specification:

• Brand new
• Housing Material: ABS
• Color: Black
• Screen Size: 5 inch
• Resolution: 800*480
• Standard: PAL/NTSC
• Video in: AV1/AV2
• Aspect Ratio: 4:3
• Power Supply: DC 12V
• Brightness: 300 nits
• Contrast: 250:1

Transmitter and Receiver:

• Work Range: Up to about 10m(Hollowness)
• Power: DC 12V
• Transmitter/Receiver Cable Length:1.4m

Review Camera:

• Sensor: PC7080 1/3 Inch Color CMOS
• TV system: NTSC
• Effective pixels: 628 X 582 pixels
• Scanning System: 2:1 Interlace
• Sync System: Internal
• Resolution: 420 TV lines
• Lens Angle: 2.8mm/120°- 1.8mm/170°
• Sensor Area: 5.961mm x 4.276mm
• Video Output: 1.0 VP-P,75 OHM
• S/N Ratio: More than 48db
• Water-proof: IP67-IP68
• Minimum Illumination: 0.2Lux/F1.8 (0Lux with LED)
• Power Supply: DC 12V
• Operation Temperature: -20℃-60℃ (RH95% Max.)
• Storage Temperature: -30℃-60℃ (RH95% Max.)

Feature:

• Full color TFT LCD display.
• Supports Car Camera, DVD, VCD, STB, Satellite receiver, and other video equipments
• With 2 road video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD, White video cable is priority signal input, when 2 road has signal input, the machine will prioritize the white end signal.
• Waterproof car rear view camera.
• 7 infrared night vision LED.
• Fine workmanship and good performance.
• Easy to install.
• Convenient to use.
• Long service life.

How to Use:

1. Take out your stock license plate light at the back of your car.
2. Fix the camera to where the stock license plate light was.
3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
4. Connect the wireless module (transmitter) to your camera via the two cables – yellow plug for AV output and black plug for power.
5. Connect the wireless module (transmitter) to the reverse light of your car to get the power – red wire for positive and black wire for negative.
6. Connect the wireless module (receiver) to your car monitor – yellow plug for AV input.
7. Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power – red wire for positive and black wire for negative.
8. You will see the images when your car is in reverse shift.

Package Included:

1 x 5 Inch Monitor

1 x Power cable

1 x 2.4G Wireless Audio Video AV Transmitter

1 x 2.4G Wireless Audio Video AV Receiver

1 x Car Rear View Camera

Note:

Please allow 0-1cm size errors due to manual measurement.

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.